Categories
Saft LS14500 2PF Battery - 3.6V AA Lithium - 2 Pins
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 10 - 24 and pay only $9.50 each
- Buy 25 - 49 and pay only $9.00 each
- Buy 50 - 99 and pay only $8.50 each
- Buy 100 - 499 and pay only $8.00 each
- Buy 500 - 999 and pay only $7.50 each
- Buy 1000 or above and pay only $7.00 each
Saft LS14500 2PF Battery - 3.6V AA Lithium - 2 Pins
3.6 Volt 2600mAh, AA Lithium Battery With 2 Pins
Description:
Saft LS14500 primary lithium cell, is based on the Lithium-Thionyl chloride (Li-SOCl2) chemistry. The LS14500 key features are the concentric electrodes (“bobbin”) construction that enables maximum loading of active materials and corresponding energy.
The LS14500 cell is designed specifically for long-term (3 to 15 years) applications, featuring a few UA based currents and periodic pulses, typically in the 5-150 mA range.
Compatible Part Numbers: LAA, ER6, VL-AA, TL5104, TL2100, T06/41, T06/51, LS6, 3B940, LTC17C, LTC-17C, ER6AA, ER6H, LST14500, Taclane Battery
Construction Features:
- Concentric (“bobbin”) electrodes
- Stainless steel containers
- Un-fused individual cells
Main Applications:
- Memory back-up
- Real-time clocks
- Utility metering
- Automated meter reading
- Wireless alarms and Security devices
- Emergency locations transmitters beacon
- Electronic toll collection
- Professional electronics
Benefits:
- High operating voltage, stable during most of the application lifetime
- Some of the highest nominal capacities on the market today
- Excellent reliability over extended operating life
- Operating Temperature Range: -60°C/+85°C (-76°F/+185°F)
- Low self-discharge rate (less than 1% after 1 year of storage at + 20°C)
- Excellent resistance to humid environments
- Low magnetic signature
- Good resistance to passivation
- Non-flammable (and non-pressurized at ambient temperature) inorganic (but corrosive) electrolyte
- Less than 1% capacity loss during storage at ambient temperature before use
- ½ AA, AA and A cell models non-restricted to transport
- Up to 25 years of mass production experience
- Excellent safety records
- Compliant with IEC 86-4 safety standard and EN 50020 intrinsic safety standard
- Compliance with the European directive RoHS